Buy PC/SC RFID Smart Card Reader Writer - DL533R CS + 5 ISO14443 Contactless 1k Cards / Key fobs
DL533R CS Smart Card Reader/Writer is manufactured by Digital Logic Ltd.
Device is build upon the NXP PR5331C3HN chip according to manufacturers recommendations and guidelines.
- Buy 5 for €49.27 each and save 4%
- Buy 10 for €47.49 each and save 7%
- Buy 25 for €45.45 each and save 11%
- Buy 50 for €43.45 each and save 15%
- Buy 100 for €41.54 each and save 19%
RFID PC/SC Smart Card Reader Writer - DL533R CS
DL533R reader device is based on NXP’s PR533 highly integrated NFC solution chip - transceiver module for contactless reader/writer communication at 13.56 MHz.
It has dedicated ROM firmware to handle different RF protocols by an integrated microcontroller, which has USB 2.0 full speed host interface and CCID protocol support.
It is ideal for use as a part of PC integration & peripherals, Electronic identity (eID) applications, Online payment/Internet security, identity validations, vending machines, e-kiosk etc.
Active amplified antenna with RF booster – providing better and more homogenous card reading range. (Optional)
SAM (Secure Access Module) slot for PCM1.1 SAM cards – ideal for storing keys in the most secure manner and for performing secure cryptography operations. (Optional)
DL533R support following RF modes:
- PCD mode for FeliCa (212 kbps and 424 kbps)
- ISO/IEC14443 Type A and B (from 106 kbps to 848 kbps)
- MIFARE® (106 kbps), ISO14443-B type cards (106 kbps)
- picoPass tag (106 kbps)
- Innovision Jewel cards (106 kbps)
The Initiator passive mode (from 106 kbps to 424 kbps) can be supported through the PC/SC transparent mode.
- MIFARE Classic® family
- MIFARE Ultralight® an Ultralight® C
- NTAG family
- MIFARE DESFire® cards
- MIFARE Plus®
- Other contactless cards which complies to ISO14443-4 standard
It also supports RF protocols ISO/IEC 14443A and B such as compliancy with Smart eID standard can be achieved at application level.
Support of USB 2.0 full speed, interoperable with USB 3.0 hubs.
When used in PCD mode, it is compliant with EMV contactless specification V2.0.1.
Supported operating systems
- Microsoft Windows 2000 or higher, including Windows 10, both 32 and 64 bit versions
On newer Windows systems it is recognized by WUDF driver as PC/SC reader, so there is no need for driver installation.
On other operating systems it is supported by the following OS through the PCSC-Lite driver:
- GNU/Linux using libusb 1.0.x and later
- Mac OS X
Features and benefits
- USB 2.0 full speed host interface and CCID protocol support
- PCSC compliant
- Integrated microcontroller implements high-level RF protocols
- Supports ISO/IEC 14443A Reader/Writer mode up to 848 kbit/s
- Supports ISO/IEC 14443B Reader/Writer mode up to 848 kbit/s
- Supports contactless communication according to the FeliCa protocol at 212 kbit/s and 424 kbit/s
- Integrated support for MIFARE® reader
- Supports MIFARE® encryption CRYPTO1®
- Complies with German eID, ICAO, and EMVCo 2.1
- Supports PCSC part 3 release 2.01.07
- Typical operating distance in Read/Write mode for communication to ISO/IEC 14443A/MIFARE®, ISO/IEC 14443B or FeliCa cards up to 50 mm depending on antenna size and tuning
- Automatic LED management with two LEDs (green and red)
- Integrated buzzer (only DL533R CS model)
- Comes in two form factors, as USB stick (DL533R) or as ISO ID-1 card sized reader (DL533R CS)
- Also available as OEM product
- Device comes with C source code demo for use with Windows Smart Card library (“Winscards”) showing basic features and device FW commands